- New Launch Offer! Mini 35% Off On Products....
- Free shipping on orders above ₹ 1,000/-
:
:
:
0
0 items
₹0.00
No products in the cart.
Arduino Nano R3 With USB Cable Soldered
In Stock
SKU:73406Main Features
- Operating Voltage (logic level): 5V
- With USB cable and Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Arduino Nano R3 CH340 Soldered without Cable
In Stock
SKU:50219- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
Arduino Uno R3 CH340 SMD Best Quality
In Stock
SKU:81657- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Arduino Uno R3 with Cable Best Quality
In Stock
SKU:73948- Micro-controller : ATmega328
- Operating Voltage : 5V
- Input Voltage (recommended) : 7-12V
- Digital I/O Pins : 14 (of which 6 provide PWM output)
- Analog Input Pins : 6
Raspberry Pi 5 Model 8GB
Out of stock
SKU:64793- Model: Raspberry Pi 5 Model 8GB
- Ram: LPDDR4X-4267 8GB SDRAM
- PCIe 2.0 x1 interface for fast peripherals
- 5V/5A DC power (PD enabled)
- Real-Time Clock (RTC), powered by an external battery
- On-board power button!!
Digital Multimeter Small Yellow Color LCD AC DC Measuring Voltage Current
In Stock
SKU:43812- Dimensions: 12.5 x 7 x 2 CM (LxWxH)
- Probe Length: 60 CM (2 feet approx.)
- Weight: 160 gm
- Color: Yellow
- 15 millimeter high LCD.
L293D Motor Driver Servo Shield for Arduino (Green Connector)
In Stock
SKU:71485- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
1 Channel 5V Relay Module Black
In Stock
SKU:27589- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
LM35D Analog Temperature Sensor Module + Cable
In Stock
SKU:64930- Based on the semiconductor LM35 temperature sensor
- Can be used to detect ambient air temperature
- Calibrated directly in °Celsius (Centigrade)
- Linear + 10 mV/°C Scale Factor
- 0.5°C Ensure accuracy (at +25°C)
- Low power consumption, less than 60uA
- Low output impedance, 1mA current through only 0.1Ω
- With screw holes for easy installation and fixed. Aperture 2.6mm
DHT11 Temperature and Humidity Sensor Module High Quality
In Stock
SKU:51374- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
- Temperature measuring range: 0~+50degree.
- Humidity measurement accuracy: ±5.0%RH.
- Temperature measurement accuracy: ±2.0degree.
DHT11 Temperature and Humidity Sensor With Wire
In Stock
SKU:80746- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
- Temperature measuring range: 0~+50degree.
- Humidity measurement accuracy: ±5.0%RH.
- Temperature measurement accuracy: ±2.0degree.
4 x 1.5V AA Battery Holder Without Cover
In Stock
SKU:36521- Cell Quantity: 4.
- Battery type: AA.
- Storage temperature: 25ºC.
- Max Operate temperature: 80ºC.
- Wire Length: 120 mm.
- Mounting holes diameter: 3 mm.
- Color: Black.
Digital Multi Servo Tester ESC Speed Control
In Stock
SKU:92038- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
Flow Sensor
Out of stock
SKU:26534- Good Quality Water Flow Sensor
- Operating Voltage: 3.5-24VDC
- Flow Range: 1-60L/Min
- Suitable for Water Pressure Below 1.75MPa
Arduino Uno R3 WiFi AtMega328p
Out of stock
SKU:70381- USB-TTL converter.
- Logic Level: 5V.
- Operating Supply Voltage: 5V.
- Digital I/O Pins: 14.
- Analog I/O Pins: 6.
Prototype Shield V3.0 for Arduino Mega with mini Breadboard
In Stock
SKU:48165- The shield can support being fully assembled with Arduino MEGA
- Support soldering components directly on this shield
- Support sticking the mini breadboards on this shield
- Reset button up top
- Mainboard aureate quadrate
- With SOP28 SMT components encapsulation
Recently Viewed Products
TTP224 4way Capacitive Touch Switch Module
In Stock
SKU:32795- Onboard TTP224 capacitive touch sensor IC 4 keys
- 4 board-level status indicator
- Working voltage: 2.4V-5.5V
- Advanced Pins breakout, so that the output mode and working mode are selectable.
- Low power selection
PS2 Joystick Module Breakout Sensor
Out of stock
SKU:86104- Dimensions: 40 x 27 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads.
- Operating Voltage: 5V.
- Long service life and stable performance.
- Standard interface and electronic building blocks.
- Widely use in Arduino DIY projects.
TTP226 8way Capacitive Touch Switch Module
In Stock
SKU:81436- Onboard 8 key TTP226 capacitive touch induction IC.
- Onboard 8-way level indicator.
- Working voltage: 2.4 to 5.5 V.
- Modules, you can set the output mode, key output mode, the longest time and fast/low power output
Infrared Obstacle Avoidance IR Sensor Module
In Stock
SKU:27964- Detection distance: 2 ~ 30cm
- Detection angle: 35 °
- Comparator chip: LM393
- 3mm screw holes for easy mounting
TCS3200 Color Recognition Sensor Module
In Stock
SKU:47258- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!


TechnoSam – Wired for Innovation. Built for Reliability.
At TechnoSam, we specialize in providing high-quality electronics modules, development boards, and IoT components for makers, developers, educators, and enterprises. Whether you’re building a prototype or scaling to production, our curated inventory and expert support help you bring your ideas to life — reliably and affordably.
Need Help?
(+91) 7030 10 3620
Monday – Friday: 10:00 AM – 05:00 PM
Saturady: 10:00 AM – 02:00 PM




















