0
0 items
₹0.00
No products in the cart.
Dispaly Modules
1602 (16×2) LCD Display with I2C/IIC interface – Blue Backlight
In Stock
- I2C interface for simplified connectivity
- Yellow backlight for enhanced visibility
- Compact 16×02 character display
- Suitable for diverse electronic applications
Add to Wishlist
Add to Wishlist
1602 (16×2) LCD Display with I2C/IIC interface – Green Backlight
In Stock
- I2C interface for simplified connectivity
- Yellow backlight for enhanced visibility
- Compact 16×02 character display
- Suitable for diverse electronic applications
Add to Wishlist
Add to Wishlist
Original JHD 16×2 Character LCD Display With Blue Backlight
In Stock
- Model: JHD659 Y/YG
- Display: 16×2 character
- Outline: 80.0×36.0x14.5
- VA: 64.5×14.5
- Controller: SPLC780D
- Character: 2.95×4.35
- Driver: 1/16
Add to Wishlist
Add to Wishlist
Original JHD 16×2 Character LCD Display With Yellow Backlight
In Stock
- Model: JHD659 Y/YG
- Display: 16×2 character
- Outline: 80.0×36.0x14.5
- VA: 64.5×14.5
- Controller: SPLC780D
- Character: 2.95×4.35
- Driver: 1/16
Add to Wishlist
Add to Wishlist
TM1638 Button Digital LED Display Module
In Stock
- Use TM1638 digital tube drive chip to drive a common cathode LED digital tube.
- Can be extended to 3 * 8 buttons, led digital tube and can be controlled separately.
- Support 8 brightness control, led digital tube and use the same brightness.
- Support cascading up to 6 of the same module.
- 8 LED, 8-bit digital tube and 8 buttons, common cathode LED digital tube, such as STC microcontroller can be directly connected.
Add to Wishlist
Add to Wishlist
PCA9685 16 Channel 12 Bit PWM Servo Motor Driver
In Stock
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
Add to Wishlist
Add to Wishlist
0.28″ 5 Wires Red Led Digital Dual DC 100V 100A Voltmeter Ammeter Without Shunt
In Stock
- Operating Voltage: 5V DC
- Current Consumption: <60mA
- Testing Voltage: 0-100V
- Testing Current: 1-100A
- Easy to read even in dim light
Add to Wishlist
Add to Wishlist
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
In Stock
- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 30 mA
- Display Dimensions: 42x24x12 (LxWxH) mm
Add to Wishlist
Add to Wishlist
LED Multicolor 3 mm (Pack of 10)
In Stock
- 5mm Round Water Clear LED Lamp
- For LED light, indication, illumination
- Viewing angle: 40 degree
- UV resistant epoxy
- With lowest power consumption, long life, and super bright
Add to Wishlist
Add to Wishlist
LED Multicolor 5 mm (Pack of 10)
In Stock
- 5mm Round Water Clear LED Lamp
- For LED light, indication, illumination
- Viewing angle: 40 degree
- UV resistant epoxy
- With lowest power consumption, long life, and super bright
Add to Wishlist
Add to Wishlist
- Input Voltage : 2 Volt – 5.5 Volts DC
- The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V
- Sensitivity can adjust by the capacitance(0~50pF)
- Stable touching detection of the human body for replacing traditional direct switch key
- Provides direct mode toggle mode by pad option(TOG pin)
- After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled
- Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched
Add to Wishlist
Add to Wishlist
LED Orange 3 mm (Pack of 10)
In Stock
- 3 mm Round Water Clear LED Lamp
- For LED light, indication, illumination
- Viewing angle: 40 degree
- UV resistant epoxy
- With lowest power consumption, long life, and super bright
Add to Wishlist
Add to Wishlist
LED Orange 5 mm (Pack of 10)
In Stock
- 5mm Round Water Clear LED Lamp
- For LED light, indication, illumination
- Viewing angle: 40 degree
- UV resistant epoxy
- With lowest power consumption, long life, and super bright
Add to Wishlist
Add to Wishlist
0.91 inch I2C/IIC 128×32 Blue OLED Display Module
In Stock
- Driving IC: SSD1306
- Operating Voltage: 3.3-5V
- Resolution Ratio: 128 x 32
- Text Color: Blue
- Background Color: Black
Add to Wishlist
Add to Wishlist
0.96 inch 128×64 OLED Display Module 6 Pin
In Stock
- Display size: 0.96″
- Resolution radio:128 x 64
- Interface modes: I2C/IIC
- Working voltage: 3.3V
- Control Chip: SSD1306
Add to Wishlist
Add to Wishlist
Blue 1.3 Inch I2C IIC 128×64 OLED Display Module 4 Pin
In Stock
- Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Pixel Color: Blue
Add to Wishlist
Add to Wishlist
Product categories
- Arduino Boards (19)
- Drone Parts (41)
- Arduino (19)
- Dispaly Modules (44)
- Development Boards & Kits (38)
- Electronics Components (207)
- Raspberry Pi (12)
- Electronics Modules (174)
- ESP Dev Boards (9)
- Wires and Cables (48)
- Motors Drivers and Actuators (81)
- 3D Printed Parts (24)
- Sensors & Modules (218)
- Relay Boards (11)
- Sensors Modules (217)
- IoT & Wireless (78)
Filter by price
Cart
TechnoSam – Empowering the IoT Future
India’s premier destination for IoT Sensor Module Development Boards and Robotics solutions. Shop from India’s trusted Online Store: Arduino, NodeMCU, ESP32, Sensors, Modules Raspberry Pi, Relay the largest collection of IoT components we are committed to revolutionizing the technological landscape with innovation, excellence, and unwavering dedication.
Need Help?
(+91) 7030 10 3620 / (+91) 20 610 96 846
Monday – Friday: 10:00 am – 06:00 pm
Saturady: 11:00 am – 05:00 pm
Sunday Support available from Support Center Click Here
Customer Service
- Free delivery for all orders over ₹1,000