0
0 items
₹0.00
No products in the cart.
PS2 Joystick Module Breakout Sensor
Out of stock
- Dimensions: 40 x 27 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads.
- Operating Voltage: 5V.
- Long service life and stable performance.
- Standard interface and electronic building blocks.
- Widely use in Arduino DIY projects.
Add to Wishlist
Add to Wishlist
MQ-136 Hydrogen Sulfide Gas Sensor
Out of stock
- Dual signal output (analog output and TTL level output)
- The TTL output effective signal is low.
- Analog output 0 ~ 5V voltage, the higher the concentration the higher the voltage.
- Good sensitivity to hydrogen sulfide, liquefied gas, natural gas, city gas, and smoke.
- with long service life and reliable stability
- fast response recovery characteristics
Add to Wishlist
Add to Wishlist
MQ-137 Ammonia Gas NH3 Sensor Module
Out of stock
- Wide detecting scope
- Fast response (less than 1s)
- High sensitivity( 3%)
- the circuit voltage: DC5V
- Stable and long life
- Operating Voltage is +5V
- Detect/Measure NH3, Ammonia
Add to Wishlist
Add to Wishlist
MQ9 Carbon Monoxide Methane and LPG Gas Sensor Module
In Stock
- Good sensitivity to CO/Combustible Gas
- High sensitivity to Methane, Propane, and CO
- Long life and low cost
- Simple drive circuit
- Input voltage: DC 5±0.2V
- Current Consumption: 150mA
Add to Wishlist
Add to Wishlist
MQ 8 Hydrogen H2 Gas Sensor Module
In Stock
- Using high-quality dual-panel design, with power indicator and TTL signal output instructions.
- The switching signal having a DO (TTL) output and analog output AO.
- TTL output valid signal is low.
- The higher the voltage, the concentration of the analog output voltage is higher.
- A hydrogen gas detection with good sensitivity.
- Has a long life and reliable stability
Add to Wishlist
Add to Wishlist
MQ7 Carbon Monoxide Gas Sensor Module
In Stock
- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
Add to Wishlist
Add to Wishlist
MQ 6 Liquefied Petroleum Isobutane Propane Gas Sensor module
In Stock
- Model: MQ-6
- Operating Voltage: 5V DC
- Detecting Range:200-10000 ppm
- Relative Humidity:<95% RH
Add to Wishlist
Add to Wishlist
MQ 5 Natural GAS Methane LPG Liquid Propane Gas Sensor Module
In Stock
Add to Wishlist
Add to Wishlist
MQ 4 High Sensitivity Gas Methane Detector Sensor Module
In Stock
- Detecting range: 300~10000ppm
- Signal output indicator.
- Dual Signal output (analog output and TTL output).
- The TTL output signal is low level, allows us to connect with SCM directly.
- Analog output 0~5V voltage.
- Quick response and recovery.
Add to Wishlist
Add to Wishlist
Raindrops Detection Sensor Module
In Stock
- Operating voltage: 5V
- Provide both digital and analog output
- Adjustable sensitivity
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- Bolt holes for easy installation
Add to Wishlist
Add to Wishlist
MQ 3 Alcohol Detector Gas Sensor Module
In Stock
- Power requirements: 5 VDC @ ~165 mA (heater on) / ~60 mA (heater off).
- Current Consumption: 150mA.
- DO output: 0.1 and 5V.
- AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detecting Concentration: 0.05-10mg/L Alcohol.
Add to Wishlist
Add to Wishlist
MQ 2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module
In Stock
- Operating Voltage:+5V
- Preheat Duration:20 s
- Analog Output Voltage:0 to 5 V
- Dimension:36x20x21 mm
Add to Wishlist
Add to Wishlist
MQ135 Air Quality Gas Sensor Module
In Stock
- Sensitivity to Ammonia, Sulphide and Benzene steam
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases.
Add to Wishlist
Add to Wishlist
AS608 Optical Fingerprint Sensor Module
Out of stock
- Resolution: 500dpi
- Supply current: <60mA
- Supply voltage: 3.3V
- Fingerprint image entry time: <1.0 seconds
- Peak current: <60mA
Add to Wishlist
Add to Wishlist
Pulse Sensor Heart Rate Detector Excellent Quality with Velcro Strap Kit
In Stock
- A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.
- The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.
- Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.
Add to Wishlist
Add to Wishlist
MAX30100 Pulse Oximeter Heart Rate Sensor Module
In Stock
Add to Wishlist
Add to Wishlist
Product categories
- Arduino Boards (19)
- Drone Parts (41)
- Arduino (19)
- Dispaly Modules (44)
- Development Boards & Kits (38)
- Electronics Components (207)
- Raspberry Pi (12)
- Electronics Modules (174)
- ESP Dev Boards (9)
- Wires and Cables (48)
- Motors Drivers and Actuators (81)
- 3D Printed Parts (24)
- Sensors & Modules (218)
- Relay Boards (11)
- Sensors Modules (217)
- IoT & Wireless (78)
Filter by price
Cart
TechnoSam – Empowering the IoT Future
India’s premier destination for IoT Sensor Module Development Boards and Robotics solutions. Shop from India’s trusted Online Store: Arduino, NodeMCU, ESP32, Sensors, Modules Raspberry Pi, Relay the largest collection of IoT components we are committed to revolutionizing the technological landscape with innovation, excellence, and unwavering dedication.
Need Help?
(+91) 7030 10 3620 / (+91) 20 610 96 846
Monday – Friday: 10:00 am – 06:00 pm
Saturady: 11:00 am – 05:00 pm
Sunday Support available from Support Center Click Here
Customer Service
- Free delivery for all orders over ₹1,000