0
0 items
₹0.00
No products in the cart.
L293D Motor Driver Servo Shield for Arduino (Green Connector)
In Stock
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
Add to Wishlist
Add to Wishlist
1 Channel 5V Relay Module Black
In Stock
- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
Add to Wishlist
Add to Wishlist
LM35D Analog Temperature Sensor Module + Cable
In Stock
- Based on the semiconductor LM35 temperature sensor
- Can be used to detect ambient air temperature
- Calibrated directly in °Celsius (Centigrade)
- Linear + 10 mV/°C Scale Factor
- 0.5°C Ensure accuracy (at +25°C)
- Low power consumption, less than 60uA
- Low output impedance, 1mA current through only 0.1Ω
- With screw holes for easy installation and fixed. Aperture 2.6mm
Add to Wishlist
Add to Wishlist
DHT11 Temperature and Humidity Sensor Module High Quality
In Stock
- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
- Temperature measuring range: 0~+50degree.
- Humidity measurement accuracy: ±5.0%RH.
- Temperature measurement accuracy: ±2.0degree.
Add to Wishlist
Add to Wishlist
DHT11 Temperature and Humidity Sensor With Wire
In Stock
- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
- Temperature measuring range: 0~+50degree.
- Humidity measurement accuracy: ±5.0%RH.
- Temperature measurement accuracy: ±2.0degree.
Add to Wishlist
Add to Wishlist
4 x 1.5V AA Battery Holder Without Cover
In Stock
- Cell Quantity: 4.
- Battery type: AA.
- Storage temperature: 25ºC.
- Max Operate temperature: 80ºC.
- Wire Length: 120 mm.
- Mounting holes diameter: 3 mm.
- Color: Black.
Add to Wishlist
Add to Wishlist
Digital Multi Servo Tester ESC Speed Control
In Stock
- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
Add to Wishlist
Add to Wishlist
- Good Quality Water Flow Sensor
- Operating Voltage: 3.5-24VDC
- Flow Range: 1-60L/Min
- Suitable for Water Pressure Below 1.75MPa
Add to Wishlist
Add to Wishlist
Prototype Shield V3.0 for Arduino Mega with mini Breadboard
In Stock
- The shield can support being fully assembled with Arduino MEGA
- Support soldering components directly on this shield
- Support sticking the mini breadboards on this shield
- Reset button up top
- Mainboard aureate quadrate
- With SOP28 SMT components encapsulation
Add to Wishlist
Add to Wishlist
Arduino Mega 2560 R3 Sensor Shield V2.0 Best Quality
In Stock
- PCB finest Immersion Gold processing
- Plug it easier to set up a variety of commonly used module interface
Add to Wishlist
Add to Wishlist
Heart Rate Monitor Kit with AD8232 ECG sensor module – Excellent Quality
In Stock
- Designed to extract, amplify, and filter small biopotential signals.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 3.5 mm Jack for Biomedical Pad Connection.
Add to Wishlist
Add to Wishlist
400 Points Transparent Breadboard Small
In Stock
- 400 tie points
- 2 Power lanes, Total 100 tie points in power lanes
- 1 Double strip, Total 300 tie points
- Perfect for Arduino shield prototyping and testing
- Plastic housing, metal contact clips
Add to Wishlist
Add to Wishlist
MB102 Breadboard Transparent 830 Points
In Stock
- Mb102 Bread Board
- 830 Solder-less Points
- Ideal for Experimenting With Circuit Design In Labs
- Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components
- Colored coordinates for easy components placement.
- Accept a variety of wire sizes 20-29 AWG
Add to Wishlist
Add to Wishlist
TM1638 Button Digital LED Display Module
In Stock
- Use TM1638 digital tube drive chip to drive a common cathode LED digital tube.
- Can be extended to 3 * 8 buttons, led digital tube and can be controlled separately.
- Support 8 brightness control, led digital tube and use the same brightness.
- Support cascading up to 6 of the same module.
- 8 LED, 8-bit digital tube and 8 buttons, common cathode LED digital tube, such as STC microcontroller can be directly connected.
Add to Wishlist
Add to Wishlist
PCA9685 16 Channel 12 Bit PWM Servo Motor Driver
In Stock
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
Add to Wishlist
Add to Wishlist
0.28″ 5 Wires Red Led Digital Dual DC 100V 100A Voltmeter Ammeter Without Shunt
In Stock
- Operating Voltage: 5V DC
- Current Consumption: <60mA
- Testing Voltage: 0-100V
- Testing Current: 1-100A
- Easy to read even in dim light
Add to Wishlist
Add to Wishlist
Product categories
- Arduino Boards (19)
- Drone Parts (41)
- Arduino (19)
- Dispaly Modules (44)
- Development Boards & Kits (38)
- Electronics Components (207)
- Raspberry Pi (12)
- Electronics Modules (174)
- ESP Dev Boards (9)
- Wires and Cables (48)
- Motors Drivers and Actuators (81)
- 3D Printed Parts (24)
- Sensors & Modules (218)
- Relay Boards (11)
- Sensors Modules (217)
- IoT & Wireless (78)
Filter by price
Cart
TechnoSam – Empowering the IoT Future
India’s premier destination for IoT Sensor Module Development Boards and Robotics solutions. Shop from India’s trusted Online Store: Arduino, NodeMCU, ESP32, Sensors, Modules Raspberry Pi, Relay the largest collection of IoT components we are committed to revolutionizing the technological landscape with innovation, excellence, and unwavering dedication.
Need Help?
(+91) 7030 10 3620 / (+91) 20 610 96 846
Monday – Friday: 10:00 am – 06:00 pm
Saturady: 11:00 am – 05:00 pm
Sunday Support available from Support Center Click Here
Customer Service
- Free delivery for all orders over ₹1,000