0
0 items
₹0.00
No products in the cart.
Infrared Obstacle Avoidance Sensor Module
In Stock
- Detection distance: 2-40cm
- IO Interface: 4-wire interfaces (- / + / S / EN)
- Output signal: TTL level
- Adjustment: adjust multi-turn resistance
- Effective angle: 35 °
Add to Wishlist
Add to Wishlist
TCRT5000 IR reflex Tracking Sensor Module
In Stock
- The working voltage: 5V
- A fixed bolt hole for easy installation
- Build-in Tcrt5000 Sensor NSOR
- Applicable to a variety of platforms including Arduino / AVR / ARM /PIC
Add to Wishlist
Add to Wishlist
TCRT5000L 5 Channel Tracking Sensor Module
In Stock
- High-Quality Tracker Sensor
- The module is a convenient carrier for eight IR emitter and receiver pairs evenly paced.
- Distance between each IR Sensor: 15mm
- Uses 5 sensors for best resolution
- Great useful in building fast line following and grid navigating robots
- Comes with easy to use digital outputs with a direct connection to microcontrollers
- The array has mounting holes of 3mm diameter for easy mounting
Add to Wishlist
Add to Wishlist
- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
Add to Wishlist
Add to Wishlist
ULN2003A Driver Module Stepper Motor Driver Board
In Stock
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
Add to Wishlist
Add to Wishlist
- Rated voltage: 5V DC
- Reduction Ratio: 64:1
- Step Angle: 5.625° /64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Pull in torque: 300 gf.cm
Add to Wishlist
Add to Wishlist
200 RPM Dual Shaft BO Motor Straight
In Stock
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kgcm
Add to Wishlist
Add to Wishlist
100 RPM Dual Shaft BO Motor Straight
In Stock
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kgcm
Add to Wishlist
Add to Wishlist
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kgcm
Add to Wishlist
Add to Wishlist
200 RPM BO Motor L Shape
In Stock
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kgcm
Add to Wishlist
Add to Wishlist
- Input Voltage : 2 Volt – 5.5 Volts DC
- The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V
- Sensitivity can adjust by the capacitance(0~50pF)
- Stable touching detection of the human body for replacing traditional direct switch key
- Provides direct mode toggle mode by pad option(TOG pin)
- After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled
- Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched
Add to Wishlist
Add to Wishlist
PIR Motion Detector Sensor Module HC SR501 Blue
In Stock
- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
- Jumper for trigger.
Add to Wishlist
Add to Wishlist
Capacitive Soil Moisture Sensor V.2.0
In Stock
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Dimensions mm(LxWxH): 98 x 23 x 4.
- Supports 3-Pin Gravity Sensor interface
- Analog output.
- Weight (gm): 15.
Add to Wishlist
Add to Wishlist
Soil Moisture Sensor Module (Red)
In Stock
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
- Operating Voltage: 3.3V~5V
Add to Wishlist
Add to Wishlist
Tower Pro SG90 180 degree Rotation Servo Motor Good Quality
In Stock
- Model: SG90
- Weight: 9 gm
- Operating voltage: 3.0V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V : 1.6kg-cm
Add to Wishlist
Add to Wishlist
Tower Pro SG90 180 Degree Rotation Servo Motor
In Stock
- Model: SG90
- Weight: 9 gm
- Operating voltage: 3.0V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V : 1.6kg-cm
Add to Wishlist
Add to Wishlist
Product categories
- Arduino Boards (19)
- Drone Parts (41)
- Arduino (19)
- Dispaly Modules (44)
- Development Boards & Kits (38)
- Electronics Components (207)
- Raspberry Pi (12)
- Electronics Modules (174)
- ESP Dev Boards (9)
- Wires and Cables (48)
- Motors Drivers and Actuators (81)
- 3D Printed Parts (24)
- Sensors & Modules (218)
- Relay Boards (11)
- Sensors Modules (217)
- IoT & Wireless (78)
Filter by price
Cart
TechnoSam – Empowering the IoT Future
India’s premier destination for IoT Sensor Module Development Boards and Robotics solutions. Shop from India’s trusted Online Store: Arduino, NodeMCU, ESP32, Sensors, Modules Raspberry Pi, Relay the largest collection of IoT components we are committed to revolutionizing the technological landscape with innovation, excellence, and unwavering dedication.
Need Help?
(+91) 7030 10 3620 / (+91) 20 610 96 846
Monday – Friday: 10:00 am – 06:00 pm
Saturady: 11:00 am – 05:00 pm
Sunday Support available from Support Center Click Here
Customer Service
- Free delivery for all orders over ₹1,000