- New Launch Offer! Mini 35% Off On Products....
- Free shipping on orders above ₹ 1,000/-
₹0.00
TechnoSam's 3D Printing Services
✅ Ultra Fast Production : Get your prints ready in Just less then 12 hrs.
✅ Rapid Delivery : Delevery in Same day to 2 working days.
✅ High-Precision Printing: Perfect for functional prototypes or final-use parts.
✅ Wide Range of Materials: PLA, ABS, Nylon, TPU, Resin & more.
✅ Affordable Pricing: Competitive rates for one-off prints and bulk orders.
✅ Trusted by 500+ Clients: Engineers, makers, businesses & students across India.
✅ Free Design Review: We’ll check your file for printability and recommend improvements.
Digital Multimeter Small Yellow Color LCD AC DC Measuring Voltage Current
- Dimensions: 12.5 x 7 x 2 CM (LxWxH)
- Probe Length: 60 CM (2 feet approx.)
- Weight: 160 gm
- Color: Yellow
- 15 millimeter high LCD.
L293D Motor Driver Servo Shield for Arduino (Green Connector)
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
4 x 1.5V AA Battery Holder Without Cover
- Cell Quantity: 4.
- Battery type: AA.
- Storage temperature: 25ºC.
- Max Operate temperature: 80ºC.
- Wire Length: 120 mm.
- Mounting holes diameter: 3 mm.
- Color: Black.
Digital Multi Servo Tester ESC Speed Control
- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
2WD Mini Round Double Deck Smart Robot Car Chassis DIY Kit
- Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.
- This car is the tachometer encoder.
- With a 4 AA battery box (batteries not included).
- It can be used for distance measurement, velocity.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
- Wireless remote control.
- Size: 21 x 15 cm (L x W).
- Wheel size: 6.5 x 2.7cm (Dia. x H).
Longer version of 4 WD Double Layer Smart Car Chassis Kit
- Strong components so as to withstand extreme terrain conditions.
- Transparent Car Chassis.
- Attractive design.
400 Points Transparent Breadboard Small
- 400 tie points
- 2 Power lanes, Total 100 tie points in power lanes
- 1 Double strip, Total 300 tie points
- Perfect for Arduino shield prototyping and testing
- Plastic housing, metal contact clips
MB102 Breadboard Transparent 830 Points
- Mb102 Bread Board
- 830 Solder-less Points
- Ideal for Experimenting With Circuit Design In Labs
- Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components
- Colored coordinates for easy components placement.
- Accept a variety of wire sizes 20-29 AWG
PCA9685 16 Channel 12 Bit PWM Servo Motor Driver
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
XL6019 DC-DC 5A Adjustable Boost Power Supply
- Model: XL6019
- Product: Adjustable Boost Power Supply Module
- Input Current: 5A (MAX)
- Input Voltage: DC 3-35 V Switching
- Working Temperature: Industrial (-40 ° C to + 85 ° C)
- Negative Output Voltage: DC 5-40V (Adjustable)
- Frequency: 220 kHZ
4-20mA to 5V Converter for Arduino
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 20A
- Sensitivity: 100mV/A
170 pts Mini Breadboard SYB-170 Transparent
- Plug-n-play.
- Easy to use.
- Components are easily interconnected using 20-28 AWG wire
- 2.54 mm hole spacing
- ABS plastic material
1M Ohm 3Pin 15mm Shaft Potentiometer (Pack of 3)
470K Ohm 3Pin 15mm Shaft Potentiometer (Pack of 3)
100K Ohm 3Pin 15mm Shaft Potentiometer (Pack of 3)
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!


TechnoSam – Wired for Innovation. Built for Reliability.
At TechnoSam, we specialize in providing high-quality electronics modules, development boards, and IoT components for makers, developers, educators, and enterprises. Whether you’re building a prototype or scaling to production, our curated inventory and expert support help you bring your ideas to life — reliably and affordably.
Need Help?
Monday – Friday: 10:00 AM – 05:00 PM
Saturady: 10:00 AM – 02:00 PM













