- New Launch Offer! Mini 35% Off On Products....
- Free shipping on orders above ₹ 1,000/-
:
:
:
0
0 items
₹0.00
No products in the cart.
Arduino Uno R3 CH340 SMD With USB Cable
In Stock
SKU:73549- Microcontroller ATmega328 (SMD) – Interface CH340G With USB
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Arduino Pro Micro ATmega32U4 Pro Micro 5V 16MHz
In Stock
SKU:14923- Model: Pro-Micro 5V
- ATMega 32U4 running at 5V/16MHz
- On-Board MINI-USB connector for programming
- 12 x Digital I/Os (5 are PWM capable)
- Rx and Tx Hardware Serial Connections
Arduino Pro Mini ATMEGA328P 3.3V-8M
In Stock
SKU:73184- Microcontroller: ATmega328
- Circuit Operating Voltage: 3.3V
- Clock frequency: 8MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceivers: RX / TX.
- 6 PWM ports: D3, D5, D6, D9, D10, D11.
- Support serial download.
Pro Mini ATMEGA328P 5V/16M Black- Standard
Out of stock
SKU:42615- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- A pair of TTL level serial port transceiver : RX / TX.
Pro Mini ATMEGA328P 5V/16M Blue
Out of stock
SKU:58392- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- A pair of TTL level serial port transceiver : RX / TX.
Arduino Pro Micro 5V 16M Leonardo
In Stock
SKU:26784- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
Arduino Pro Mini ATMEGA328P 5V/16M
In Stock
SKU:91537- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7
- A pair of TTL level serial port transceiver : RX / TX
- 6 PWM port: D3, D5, D6, D9, D10, D11
- Support serial download
Arduino Mega 2560 Board with USB Cable
Out of stock
SKU:64851- 54 Digital I/O terminals (14 of which have programmable PWM outputs)
- 16 Analog Inputs
- 4 UARTs (hardware serial ports)
- 16 MHz crystal clock
- Operating voltage: 6 ~ 12v
Arduino Nano R3 With USB Cable Soldered
In Stock
SKU:73406Main Features
- Operating Voltage (logic level): 5V
- With USB cable and Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Arduino Nano R3 CH340 Soldered without Cable
In Stock
SKU:50219- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
Arduino Uno R3 CH340 SMD Best Quality
In Stock
SKU:81657- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Arduino Uno R3 with Cable Best Quality
In Stock
SKU:73948- Micro-controller : ATmega328
- Operating Voltage : 5V
- Input Voltage (recommended) : 7-12V
- Digital I/O Pins : 14 (of which 6 provide PWM output)
- Analog Input Pins : 6
L293D Motor Driver Servo Shield for Arduino (Green Connector)
In Stock
SKU:71485- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
Digital Multi Servo Tester ESC Speed Control
In Stock
SKU:92038- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
Arduino Uno R3 WiFi AtMega328p
Out of stock
SKU:70381- USB-TTL converter.
- Logic Level: 5V.
- Operating Supply Voltage: 5V.
- Digital I/O Pins: 14.
- Analog I/O Pins: 6.
2WD Mini Round Double Deck Smart Robot Car Chassis DIY Kit
In Stock
SKU:50467- Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.
- This car is the tachometer encoder.
- With a 4 AA battery box (batteries not included).
- It can be used for distance measurement, velocity.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
- Wireless remote control.
- Size: 21 x 15 cm (L x W).
- Wheel size: 6.5 x 2.7cm (Dia. x H).
Recently Viewed Products
PETG 3D Printer Filament (Virtual) – White
Out of stock
SKU:1987659- Virtual Filament (Only for 3D Printer Subscription)
- Consistently High Quality and durable prints
- 10 times stronger than regular PLA on the market
- Deliver exceptional performance and printing smoothness
- Made from great, high-performance materials for professional prints
- Ready to print with any 3D Printer Subscription plan you take
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!


TechnoSam – Wired for Innovation. Built for Reliability.
At TechnoSam, we specialize in providing high-quality electronics modules, development boards, and IoT components for makers, developers, educators, and enterprises. Whether you’re building a prototype or scaling to production, our curated inventory and expert support help you bring your ideas to life — reliably and affordably.
Need Help?
(+91) 7030 10 3620
Monday – Friday: 10:00 AM – 05:00 PM
Saturady: 10:00 AM – 02:00 PM
















