- New Launch Offer! Mini 35% Off On Products....
- Free shipping on orders above ₹ 1,000/-
₹0.00
TechnoSam's 3D Printing Services
✅ Ultra Fast Production : Get your prints ready in Just less then 12 hrs.
✅ Rapid Delivery : Delevery in Same day to 2 working days.
✅ High-Precision Printing: Perfect for functional prototypes or final-use parts.
✅ Wide Range of Materials: PLA, ABS, Nylon, TPU, Resin & more.
✅ Affordable Pricing: Competitive rates for one-off prints and bulk orders.
✅ Trusted by 500+ Clients: Engineers, makers, businesses & students across India.
✅ Free Design Review: We’ll check your file for printability and recommend improvements.
Raspberry Pi Pico Soldered Best Quality
- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Onboard temperature sensor
Raspberry Pi 5 Model 8GB
- Model: Raspberry Pi 5 Model 8GB
- Ram: LPDDR4X-4267 8GB SDRAM
- PCIe 2.0 x1 interface for fast peripherals
- 5V/5A DC power (PD enabled)
- Real-Time Clock (RTC), powered by an external battery
- On-board power button!!
L293D Motor Driver Servo Shield for Arduino (Green Connector)
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
LM35D Analog Temperature Sensor Module + Cable
- Based on the semiconductor LM35 temperature sensor
- Can be used to detect ambient air temperature
- Calibrated directly in °Celsius (Centigrade)
- Linear + 10 mV/°C Scale Factor
- 0.5°C Ensure accuracy (at +25°C)
- Low power consumption, less than 60uA
- Low output impedance, 1mA current through only 0.1Ω
- With screw holes for easy installation and fixed. Aperture 2.6mm
DHT11 Temperature and Humidity Sensor Module High Quality
- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
- Temperature measuring range: 0~+50degree.
- Humidity measurement accuracy: ±5.0%RH.
- Temperature measurement accuracy: ±2.0degree.
DHT11 Temperature and Humidity Sensor With Wire
- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
- Temperature measuring range: 0~+50degree.
- Humidity measurement accuracy: ±5.0%RH.
- Temperature measurement accuracy: ±2.0degree.
Digital Multi Servo Tester ESC Speed Control
- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
Flow Sensor
- Good Quality Water Flow Sensor
- Operating Voltage: 3.5-24VDC
- Flow Range: 1-60L/Min
- Suitable for Water Pressure Below 1.75MPa
Prototype Shield V3.0 for Arduino Mega with mini Breadboard
- The shield can support being fully assembled with Arduino MEGA
- Support soldering components directly on this shield
- Support sticking the mini breadboards on this shield
- Reset button up top
- Mainboard aureate quadrate
- With SOP28 SMT components encapsulation
Arduino Mega 2560 R3 Sensor Shield V2.0 Best Quality
- PCB finest Immersion Gold processing
- Plug it easier to set up a variety of commonly used module interface
2WD Mini Round Double Deck Smart Robot Car Chassis DIY Kit
- Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.
- This car is the tachometer encoder.
- With a 4 AA battery box (batteries not included).
- It can be used for distance measurement, velocity.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
- Wireless remote control.
- Size: 21 x 15 cm (L x W).
- Wheel size: 6.5 x 2.7cm (Dia. x H).
Longer version of 4 WD Double Layer Smart Car Chassis Kit
- Strong components so as to withstand extreme terrain conditions.
- Transparent Car Chassis.
- Attractive design.
Heart Rate Monitor Kit with AD8232 ECG sensor module – Excellent Quality
- Designed to extract, amplify, and filter small biopotential signals.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 3.5 mm Jack for Biomedical Pad Connection.
PCA9685 16 Channel 12 Bit PWM Servo Motor Driver
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
0.28″ 5 Wires Red Led Digital Dual DC 100V 100A Voltmeter Ammeter Without Shunt
- Operating Voltage: 5V DC
- Current Consumption: <60mA
- Testing Voltage: 0-100V
- Testing Current: 1-100A
- Easy to read even in dim light
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!


TechnoSam – Wired for Innovation. Built for Reliability.
At TechnoSam, we specialize in providing high-quality electronics modules, development boards, and IoT components for makers, developers, educators, and enterprises. Whether you’re building a prototype or scaling to production, our curated inventory and expert support help you bring your ideas to life — reliably and affordably.
Need Help?
Monday – Friday: 10:00 AM – 05:00 PM
Saturady: 10:00 AM – 02:00 PM















