- New Launch Offer! Mini 35% Off On Products....
- Free shipping on orders above ₹ 1,000/-
:
:
:
0
0 items
₹0.00
No products in the cart.
1 Channel 5V Relay Module Black
In Stock
SKU:27589- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
LM35D Analog Temperature Sensor Module + Cable
In Stock
SKU:64930- Based on the semiconductor LM35 temperature sensor
- Can be used to detect ambient air temperature
- Calibrated directly in °Celsius (Centigrade)
- Linear + 10 mV/°C Scale Factor
- 0.5°C Ensure accuracy (at +25°C)
- Low power consumption, less than 60uA
- Low output impedance, 1mA current through only 0.1Ω
- With screw holes for easy installation and fixed. Aperture 2.6mm
DHT11 Temperature and Humidity Sensor Module High Quality
In Stock
SKU:51374- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
- Temperature measuring range: 0~+50degree.
- Humidity measurement accuracy: ±5.0%RH.
- Temperature measurement accuracy: ±2.0degree.
DHT11 Temperature and Humidity Sensor With Wire
In Stock
SKU:80746- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
- Temperature measuring range: 0~+50degree.
- Humidity measurement accuracy: ±5.0%RH.
- Temperature measurement accuracy: ±2.0degree.
Flow Sensor
Out of stock
SKU:26534- Good Quality Water Flow Sensor
- Operating Voltage: 3.5-24VDC
- Flow Range: 1-60L/Min
- Suitable for Water Pressure Below 1.75MPa
Prototype Shield V3.0 for Arduino Mega with mini Breadboard
In Stock
SKU:48165- The shield can support being fully assembled with Arduino MEGA
- Support soldering components directly on this shield
- Support sticking the mini breadboards on this shield
- Reset button up top
- Mainboard aureate quadrate
- With SOP28 SMT components encapsulation
Arduino Mega 2560 R3 Sensor Shield V2.0 Best Quality
In Stock
SKU:62947- PCB finest Immersion Gold processing
- Plug it easier to set up a variety of commonly used module interface
Heart Rate Monitor Kit with AD8232 ECG sensor module – Excellent Quality
In Stock
SKU:12459- Designed to extract, amplify, and filter small biopotential signals.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 3.5 mm Jack for Biomedical Pad Connection.
0.28″ 5 Wires Red Led Digital Dual DC 100V 100A Voltmeter Ammeter Without Shunt
In Stock
SKU:87124- Operating Voltage: 5V DC
- Current Consumption: <60mA
- Testing Voltage: 0-100V
- Testing Current: 1-100A
- Easy to read even in dim light
HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module
In Stock
SKU:31098- Bluetooth Protocol: Bluetooth Specification V4.0 BLE
- USB Protocol: USB V2.0
- Operating Frequency: 2.4GHz ISM band
- Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
- Transmitting Power: ≤4dBm
- Sensitivity: ≤-84dBm at 0.1% BER
- It’s easy to use and completely encapsulated.
- You can set it as slave or master.
- You can use AT command set the baud rate.
ACS712-20A Range Current Sensor Module
In Stock
SKU:13589- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 20A
- Sensitivity: 100mV/A
E18-D80NK Proximity Sensor Adjustable IR
Out of stock
SKU:58603- Less influence on the color of reflected objects, reflectivity.
- Compact size.
- Industrial grade quality.
- Can detect colour difference from certain range.
- TTL output low whenever sensor senses a obstacle.
- Adjustable Detection distance of 3cm to 80cm.
- External control circuit unnecessary.
- Low cost.
- Output indication LED.
- Digital output.
- Low consumption.
Micro SD Card Reader Module for Arduino
In Stock
SKU:81635- Power supply: 4.5V – 5.5V, 3.3V voltage regulator circuit board
- Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm
- Control Interface: GND, VCC, MISO, MOSI, SCK, CS
- Size: 45 x 28mm
- Net weight: 6g
SD Card Reading Writing Module for Arduino
In Stock
SKU:50172- All SD SPI pins output, MOSI, SCK, MISO, and CS.
- Support 5V/3.3V input.
- This module can handle 2GB SD cards.
- Size:4.7 x 3.1 cm.
- LED indicator.
- SD Card Holder.
- Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
Small Microphone Sound Sensor Module
In Stock
SKU:68394- There is a mounting screw hole 3mm.
- 5v DC power supply
- With analog output
- There are threshold level output flip
- Power indicator light
1.5-5V DC Vibration Motor with Wire
In Stock
SKU:28915 Description of 1.5-5V DC Vibration Motor with Wire:
Add to cart
- Speed(RPM):19000
- Motor diameter: 6mm
- Shaft diameter: 0.8mm
- Shaft length: 4mm
- Rated voltage: 1.5V-4.5V
Recently Viewed Products
PETG 3D Printer Filament (Virtual) – White
Out of stock
SKU:1987659- Virtual Filament (Only for 3D Printer Subscription)
- Consistently High Quality and durable prints
- 10 times stronger than regular PLA on the market
- Deliver exceptional performance and printing smoothness
- Made from great, high-performance materials for professional prints
- Ready to print with any 3D Printer Subscription plan you take
MQ135 Air Quality Gas Sensor Module
In Stock
SKU:36849- Sensitivity to Ammonia, Sulphide and Benzene steam
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases.
PETG 3D Printer Filament (Virtual) – Red
Out of stock
SKU:1832109- Virtual Filament (Only for 3D Printer Subscription)
- Consistently High Quality and durable prints
- 10 times stronger than regular PLA on the market
- Deliver exceptional performance and printing smoothness
- Made from great, high-performance materials for professional prints
- Ready to print with any 3D Printer Subscription plan you take
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!


TechnoSam – Wired for Innovation. Built for Reliability.
At TechnoSam, we specialize in providing high-quality electronics modules, development boards, and IoT components for makers, developers, educators, and enterprises. Whether you’re building a prototype or scaling to production, our curated inventory and expert support help you bring your ideas to life — reliably and affordably.
Need Help?
(+91) 7030 10 3620
Monday – Friday: 10:00 AM – 05:00 PM
Saturady: 10:00 AM – 02:00 PM


















