- New Launch Offer! Mini 35% Off On Products....
- Free shipping on orders above ₹ 1,000/-
:
:
:
0
0 items
₹0.00
No products in the cart.
LM35D Analog Temperature Sensor Module + Cable
In Stock
SKU:64930- Based on the semiconductor LM35 temperature sensor
- Can be used to detect ambient air temperature
- Calibrated directly in °Celsius (Centigrade)
- Linear + 10 mV/°C Scale Factor
- 0.5°C Ensure accuracy (at +25°C)
- Low power consumption, less than 60uA
- Low output impedance, 1mA current through only 0.1Ω
- With screw holes for easy installation and fixed. Aperture 2.6mm
DHT11 Temperature and Humidity Sensor Module High Quality
In Stock
SKU:51374- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
- Temperature measuring range: 0~+50degree.
- Humidity measurement accuracy: ±5.0%RH.
- Temperature measurement accuracy: ±2.0degree.
DHT11 Temperature and Humidity Sensor With Wire
In Stock
SKU:80746- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
- Temperature measuring range: 0~+50degree.
- Humidity measurement accuracy: ±5.0%RH.
- Temperature measurement accuracy: ±2.0degree.
SafeConnect FLAT 45CM 22AWG Servo Lead Extension (JR) Cable
In Stock
SKU:72635SafeConnect Twisted 15CM 22AWG Servo Lead Extension (JR) Cable w ith Self Locking Hook
In Stock
SKU:35971SafeConnect Twisted 15CM 22AWG Servo Lead Extension (JR) Cable
In Stock
SKU:18432SafeConnect Flat 15CM 26AWG Servo Lead Extension (JR) Cable
In Stock
SKU:57082SafeConnect Flat 30CM 22AWG Servo Lead Extension (JR) Cable
In Stock
SKU:94271- High-Quality cable
- One male and one female connector.
- Flat 30 cm Servo Lead Extention (JR)
- Quality wire and connectors used.
- Great for larger planes with servos that experience high loads.
10CM Male to Male Servo Lead (JR) 26AWG
In Stock
SKU:59813Flow Sensor
Out of stock
SKU:26534- Good Quality Water Flow Sensor
- Operating Voltage: 3.5-24VDC
- Flow Range: 1-60L/Min
- Suitable for Water Pressure Below 1.75MPa
Prototype Shield V3.0 for Arduino Mega with mini Breadboard
In Stock
SKU:48165- The shield can support being fully assembled with Arduino MEGA
- Support soldering components directly on this shield
- Support sticking the mini breadboards on this shield
- Reset button up top
- Mainboard aureate quadrate
- With SOP28 SMT components encapsulation
Arduino Mega 2560 R3 Sensor Shield V2.0 Best Quality
In Stock
SKU:62947- PCB finest Immersion Gold processing
- Plug it easier to set up a variety of commonly used module interface
Heart Rate Monitor Kit with AD8232 ECG sensor module – Excellent Quality
In Stock
SKU:12459- Designed to extract, amplify, and filter small biopotential signals.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 3.5 mm Jack for Biomedical Pad Connection.
Micro USB Cable 50CM
In Stock
SKU:16284- Fully compatible with the PC.
- Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions.
- Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
Cable for Arduino Nano USB 2.0 A to USB 2.0 Mini B 30cm
In Stock
SKU:89730- Fully compatible with the PC.
- Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions.
- Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
USB to Micro USB Cable wire 1M
In Stock
SKU:51473- Fully compatible with the PC.
- Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions.
- Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
Recently Viewed Products
4×3 Matrix 12 keys Membrane Switch Keypad
In Stock
SKU:27504- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage (V): 12 DC
- Virtual Filament (Only for 3D Printer Subscription)
- Consistently High Quality and durable prints
- 10 times stronger than regular PLA on the market
- Deliver exceptional performance and printing smoothness
- Made from great, high-performance materials for professional prints
- Ready to print with any 3D Printer Subscription plan you take
PETG 3D Printer Filament (Virtual) – Yellow
Out of stock
SKU:1343210- Virtual Filament (Only for 3D Printer Subscription)
- Consistently High Quality and durable prints
- 10 times stronger than regular PLA on the market
- Deliver exceptional performance and printing smoothness
- Made from great, high-performance materials for professional prints
- Ready to print with any 3D Printer Subscription plan you take
Photosensitive Light Dependent LDR Module LM393
In Stock
SKU:59614- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!


TechnoSam – Wired for Innovation. Built for Reliability.
At TechnoSam, we specialize in providing high-quality electronics modules, development boards, and IoT components for makers, developers, educators, and enterprises. Whether you’re building a prototype or scaling to production, our curated inventory and expert support help you bring your ideas to life — reliably and affordably.
Need Help?
(+91) 7030 10 3620
Monday – Friday: 10:00 AM – 05:00 PM
Saturady: 10:00 AM – 02:00 PM



















