- New Launch Offer! Mini 35% Off On Products....
- Free shipping on orders above ₹ 1,000/-
₹0.00
TechnoSam's 3D Printing Services
✅ Ultra Fast Production : Get your prints ready in Just less then 12 hrs.
✅ Rapid Delivery : Delevery in Same day to 2 working days.
✅ High-Precision Printing: Perfect for functional prototypes or final-use parts.
✅ Wide Range of Materials: PLA, ABS, Nylon, TPU, Resin & more.
✅ Affordable Pricing: Competitive rates for one-off prints and bulk orders.
✅ Trusted by 500+ Clients: Engineers, makers, businesses & students across India.
✅ Free Design Review: We’ll check your file for printability and recommend improvements.
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only(Dark Grey)
- DIY open source: OTTO
- Compatible with SG90 servo and nano-shield
- 3D printed parts using from PLA plastic
- 3D printed parts only
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Light Grey)
- DIY open source: OTTO
- Compatible with SG90 servo and nano-shield
- 3D printed parts using from PLA plastic
- 3D printed parts only
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Green)
- DIY open source: OTTO
- Compatible with SG90 servo and nano-shield
- 3D printed parts using from PLA plastic
- 3D printed parts only
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Brown)
- DIY open source: OTTO
- Compatible with SG90 servo and nano-shield
- 3D printed parts using from PLA plastic
- 3D printed parts only
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Yellow)
- DIY open source: OTTO
- Compatible with SG90 servo and nano-shield
- 3D printed parts using from PLA plastic
- 3D printed parts only
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Orange)
- DIY open source: OTTO
- Compatible with SG90 servo and nano-shield
- 3D printed parts using from PLA plastic
- 3D printed parts only
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Royal Blue)
- DIY open source: OTTO
- Compatible with SG90 servo and nano-shield
- 3D printed parts using from PLA plastic
- 3D printed parts only
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Red)
- DIY open source: OTTO
- Compatible with SG90 servo and nano-shield
- 3D printed parts using from PLA plastic
- 3D printed parts only
Raspberry Pi Pico Soldered Best Quality
- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Onboard temperature sensor
Raspberry Pi 5 Model 8GB
- Model: Raspberry Pi 5 Model 8GB
- Ram: LPDDR4X-4267 8GB SDRAM
- PCIe 2.0 x1 interface for fast peripherals
- 5V/5A DC power (PD enabled)
- Real-Time Clock (RTC), powered by an external battery
- On-board power button!!
Mounting Bracket for N20 Micro Gear motors-2pcs
RC522 RFID 13.56MHZ Reader Writer Module
- Voltage: DC 3.3V (Do not use 5V supply)
- Operating Current :13-26mA
- Idle Current :10-13mA
- Operating Frequency: 13.56MHz
- Highly integrated analog circuitry to demodulate and decode responses
- Supports ISO/IEC 14443 A/MIFARE
- Typical operating distance in reading/Write mode up to 50 mm
HX1838 VS1838 NEC Infrared IR Remote Control Sensor Module For Arduino (Copy)
- Crystal: the oscillation frequency of 455.
- Button: free height is less than 3mm, the force 200-350g, the life of more than 200 000.
- Photo-detector and preamplifier in one package.
- Internal filter for PCM frequency.
- Improved shielding against EMI.
- Don’t forget to add CR2025 Battery to your Cart as this remote does not come with a battery
HX1838 VS1838 NEC Infrared IR Remote Control Sensor Module For Arduino
- Crystal: the oscillation frequency of 455.
- Button: free height is less than 3mm, the force 200-350g, the life of more than 200 000.
- Photo-detector and preamplifier in one package.
- Internal filter for PCM frequency.
- Improved shielding against EMI.
- Don’t forget to add CR2025 Battery to your Cart as this remote does not come with a battery
IR Remote Control (Without Battery)
- Remote control distance: more than 8 meters
- Crystal: the oscillation frequency of 455
- IR carrier frequency: 38KHz
- Output form: Digital
- Power Supply: CR2032 Battery
- Pointing Angle: up to 60º
- Button: free height is less than 3mm, the force 200-350g, the life of more than 200 000 click
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!


TechnoSam – Wired for Innovation. Built for Reliability.
At TechnoSam, we specialize in providing high-quality electronics modules, development boards, and IoT components for makers, developers, educators, and enterprises. Whether you’re building a prototype or scaling to production, our curated inventory and expert support help you bring your ideas to life — reliably and affordably.
Need Help?
Monday – Friday: 10:00 AM – 05:00 PM
Saturady: 10:00 AM – 02:00 PM















