- New Launch Offer! Mini 35% Off On Products....
- Free shipping on orders above ₹ 1,000/-
₹0.00
TechnoSam's 3D Printing Services
✅ Ultra Fast Production : Get your prints ready in Just less then 12 hrs.
✅ Rapid Delivery : Delevery in Same day to 2 working days.
✅ High-Precision Printing: Perfect for functional prototypes or final-use parts.
✅ Wide Range of Materials: PLA, ABS, Nylon, TPU, Resin & more.
✅ Affordable Pricing: Competitive rates for one-off prints and bulk orders.
✅ Trusted by 500+ Clients: Engineers, makers, businesses & students across India.
✅ Free Design Review: We’ll check your file for printability and recommend improvements.
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only(Dark Grey)
- DIY open source: OTTO
- Compatible with SG90 servo and nano-shield
- 3D printed parts using from PLA plastic
- 3D printed parts only
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Light Grey)
- DIY open source: OTTO
- Compatible with SG90 servo and nano-shield
- 3D printed parts using from PLA plastic
- 3D printed parts only
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Green)
- DIY open source: OTTO
- Compatible with SG90 servo and nano-shield
- 3D printed parts using from PLA plastic
- 3D printed parts only
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Brown)
- DIY open source: OTTO
- Compatible with SG90 servo and nano-shield
- 3D printed parts using from PLA plastic
- 3D printed parts only
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Yellow)
- DIY open source: OTTO
- Compatible with SG90 servo and nano-shield
- 3D printed parts using from PLA plastic
- 3D printed parts only
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Orange)
- DIY open source: OTTO
- Compatible with SG90 servo and nano-shield
- 3D printed parts using from PLA plastic
- 3D printed parts only
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Royal Blue)
- DIY open source: OTTO
- Compatible with SG90 servo and nano-shield
- 3D printed parts using from PLA plastic
- 3D printed parts only
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Red)
- DIY open source: OTTO
- Compatible with SG90 servo and nano-shield
- 3D printed parts using from PLA plastic
- 3D printed parts only
L293D Motor Driver Servo Shield for Arduino (Green Connector)
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
1 Channel 5V Relay Module Black
- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
Digital Multi Servo Tester ESC Speed Control
- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
2WD Mini Round Double Deck Smart Robot Car Chassis DIY Kit
- Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.
- This car is the tachometer encoder.
- With a 4 AA battery box (batteries not included).
- It can be used for distance measurement, velocity.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
- Wireless remote control.
- Size: 21 x 15 cm (L x W).
- Wheel size: 6.5 x 2.7cm (Dia. x H).
Longer version of 4 WD Double Layer Smart Car Chassis Kit
- Strong components so as to withstand extreme terrain conditions.
- Transparent Car Chassis.
- Attractive design.
PCA9685 16 Channel 12 Bit PWM Servo Motor Driver
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
65mm Rubber Tyre Wheel for BO Motors Red
- Tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- Width : 28 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Black.
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!


TechnoSam – Wired for Innovation. Built for Reliability.
At TechnoSam, we specialize in providing high-quality electronics modules, development boards, and IoT components for makers, developers, educators, and enterprises. Whether you’re building a prototype or scaling to production, our curated inventory and expert support help you bring your ideas to life — reliably and affordably.
Need Help?
Monday – Friday: 10:00 AM – 05:00 PM
Saturady: 10:00 AM – 02:00 PM















