- New Launch Offer! Mini 35% Off On Products....
- Free shipping on orders above ₹ 1,000/-
:
:
:
0
0 items
₹0.00
No products in the cart.
Infrared Obstacle Avoidance IR Sensor Module
In Stock
SKU:27964- Detection distance: 2 ~ 30cm
- Detection angle: 35 °
- Comparator chip: LM393
- 3mm screw holes for easy mounting
Thumb Joystick Button
Out of stock
SKU:19375PS2 Joystick Module Breakout Sensor
Out of stock
SKU:86104- Dimensions: 40 x 27 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads.
- Operating Voltage: 5V.
- Long service life and stable performance.
- Standard interface and electronic building blocks.
- Widely use in Arduino DIY projects.
MQ-136 Hydrogen Sulfide Gas Sensor
Out of stock
SKU:74259- Dual signal output (analog output and TTL level output)
- The TTL output effective signal is low.
- Analog output 0 ~ 5V voltage, the higher the concentration the higher the voltage.
- Good sensitivity to hydrogen sulfide, liquefied gas, natural gas, city gas, and smoke.
- with long service life and reliable stability
- fast response recovery characteristics
MQ-137 Ammonia Gas NH3 Sensor Module
Out of stock
SKU:58691- Wide detecting scope
- Fast response (less than 1s)
- High sensitivity( 3%)
- the circuit voltage: DC5V
- Stable and long life
- Operating Voltage is +5V
- Detect/Measure NH3, Ammonia
MQ9 Carbon Monoxide Methane and LPG Gas Sensor Module
In Stock
SKU:10759- Good sensitivity to CO/Combustible Gas
- High sensitivity to Methane, Propane, and CO
- Long life and low cost
- Simple drive circuit
- Input voltage: DC 5±0.2V
- Current Consumption: 150mA
MQ 8 Hydrogen H2 Gas Sensor Module
In Stock
SKU:68214- Using high-quality dual-panel design, with power indicator and TTL signal output instructions.
- The switching signal having a DO (TTL) output and analog output AO.
- TTL output valid signal is low.
- The higher the voltage, the concentration of the analog output voltage is higher.
- A hydrogen gas detection with good sensitivity.
- Has a long life and reliable stability
MQ7 Carbon Monoxide Gas Sensor Module
In Stock
SKU:45328- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
MQ 6 Liquefied Petroleum Isobutane Propane Gas Sensor module
In Stock
SKU:91845- Model: MQ-6
- Operating Voltage: 5V DC
- Detecting Range:200-10000 ppm
- Relative Humidity:<95% RH
MQ 5 Natural GAS Methane LPG Liquid Propane Gas Sensor Module
In Stock
SKU:63072MQ 4 High Sensitivity Gas Methane Detector Sensor Module
In Stock
SKU:28406- Detecting range: 300~10000ppm
- Signal output indicator.
- Dual Signal output (analog output and TTL output).
- The TTL output signal is low level, allows us to connect with SCM directly.
- Analog output 0~5V voltage.
- Quick response and recovery.
Raindrops Detection Sensor Module
In Stock
SKU:71658- Operating voltage: 5V
- Provide both digital and analog output
- Adjustable sensitivity
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- Bolt holes for easy installation
MQ 3 Alcohol Detector Gas Sensor Module
In Stock
SKU:129587- Power requirements: 5 VDC @ ~165 mA (heater on) / ~60 mA (heater off).
- Current Consumption: 150mA.
- DO output: 0.1 and 5V.
- AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detecting Concentration: 0.05-10mg/L Alcohol.
MQ 2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module
In Stock
SKU:54978- Operating Voltage:+5V
- Preheat Duration:20 s
- Analog Output Voltage:0 to 5 V
- Dimension:36x20x21 mm
MQ135 Air Quality Gas Sensor Module
In Stock
SKU:36849- Sensitivity to Ammonia, Sulphide and Benzene steam
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases.
Flex Sensor – 4.5 inch
Out of stock
SKU:84052- Flex length: 5.6 cm.
- Total Length: 4.5″ .
- Life Cycle : >1 million.
- Height : 0.43mm (0.017″),
- Flat Resistance: 10K Ohms ±30%.
- Power Rating: 0.5 Watts.
Recently Viewed Products
TowerPro MG946R Digital High Torque Metal Gear Servo Motor
Out of stock
SKU:64817- Operating Voltage: 4.8-6.6 V
- Angle of rotation: 180 degrees
- Temperature Range: 0- 55º
- Servo wire length: 32cm
- Pulse cycle: 1 mS
- Servo Plug: JR (Fits JR and Futaba)
- Gear Type: Metal gear
- Power Supply: Through External Adapter
- Servo arms & screws included and fit with Futaba servo arm
- Included Universal “S” type connector that fits most receivers, including Futaba, JR, Hitec ,GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum.
PETG 3D Printer Filament (Virtual) – Orange
Out of stock
SKU:1256789- Virtual Filament (Only for 3D Printer Subscription)
- Consistently High Quality and durable prints
- 10 times stronger than regular PLA on the market
- Deliver exceptional performance and printing smoothness
- Made from great, high-performance materials for professional prints
- Ready to print with any 3D Printer Subscription plan you take
IR Flame Sensor Infrared Receiver
In Stock
SKU:49836- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
- Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
- Detection angle about 60 degrees, the flame spectrum especially sensitive.
- The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.
TTP224 4way Capacitive Touch Switch Module
In Stock
SKU:32795- Onboard TTP224 capacitive touch sensor IC 4 keys
- 4 board-level status indicator
- Working voltage: 2.4V-5.5V
- Advanced Pins breakout, so that the output mode and working mode are selectable.
- Low power selection
- Virtual Filament (Only for 3D Printer Subscription)
- Consistently High Quality and durable prints
- 10 times stronger than regular PLA on the market
- Deliver exceptional performance and printing smoothness
- Made from great, high-performance materials for professional prints
- Ready to print with any 3D Printer Subscription plan you take
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!


TechnoSam – Wired for Innovation. Built for Reliability.
At TechnoSam, we specialize in providing high-quality electronics modules, development boards, and IoT components for makers, developers, educators, and enterprises. Whether you’re building a prototype or scaling to production, our curated inventory and expert support help you bring your ideas to life — reliably and affordably.
Need Help?
(+91) 7030 10 3620
Monday – Friday: 10:00 AM – 05:00 PM
Saturady: 10:00 AM – 02:00 PM




















