- New Launch Offer! Mini 35% Off On Products....
- Free shipping on orders above ₹ 1,000/-
:
:
:
0
0 items
₹0.00
No products in the cart.
Micro SD Card Reader Module for Arduino
In Stock
SKU:81635- Power supply: 4.5V – 5.5V, 3.3V voltage regulator circuit board
- Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm
- Control Interface: GND, VCC, MISO, MOSI, SCK, CS
- Size: 45 x 28mm
- Net weight: 6g
SD Card Reading Writing Module for Arduino
In Stock
SKU:50172- All SD SPI pins output, MOSI, SCK, MISO, and CS.
- Support 5V/3.3V input.
- This module can handle 2GB SD cards.
- Size:4.7 x 3.1 cm.
- LED indicator.
- SD Card Holder.
- Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
Small Microphone Sound Sensor Module
In Stock
SKU:68394- There is a mounting screw hole 3mm.
- 5v DC power supply
- With analog output
- There are threshold level output flip
- Power indicator light
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
In Stock
SKU:39615- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 30 mA
- Display Dimensions: 42x24x12 (LxWxH) mm
1.5-5V DC Vibration Motor with Wire
In Stock
SKU:28915 Description of 1.5-5V DC Vibration Motor with Wire:
Add to cart
- Speed(RPM):19000
- Motor diameter: 6mm
- Shaft diameter: 0.8mm
- Shaft length: 4mm
- Rated voltage: 1.5V-4.5V
ERM Coin Vibration Motor 8mm Dia.,3.4mm Width wire length 26mm
In Stock
SKU:62590- Product: ERM Coin Vibration Motor
- Operating Voltage: 2.5-3 V DC
- Starting Voltage: 2.3 Max V DC
- Starting Current: 190.0 mA Max
- Rated RPM: 9000 Min RPM
- Rated Vol.: 3.0 V DC
Voltage Detection Sensor Module 25V
In Stock
SKU:93164- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
- Jumper for trigger.
HC SR505 Mini Infrared PIR Motion Sensor
In Stock
SKU:76825- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
- Jumper for trigger.
LM393 Sound Detection Sensor Module Black
In Stock
SKU:50381-
- Main chip: LM393, Electret condenser microphone
- Working voltage: DC 3.3-5V
- Induction distance is 0.5M
- Signal output Indication
- Single channel signal output
- The output effective signal is low level.
Sound Detection Module Sensor
In Stock
SKU:14697-
- Main chip: LM393, Electret condenser microphone
- Working voltage: DC 3.3-5V
- Induction distance is 0.5M
- Signal output Indication
- Single channel signal output
- The output effective signal is low level.
Infrared IR 1838 Sensor Receiver Module
In Stock
SKU:83912- Dimension: 2.5 x 1.5 x 1.5 cm.
- Receiving angle: 90 °.
- Working voltage: 2.7 ~ 5.5V.
- Frequency: 37.9KHz
- Receiving range: 18m.
- Weight: 4 gm
TCRT5000 Single Channel Line Tracking Sensor Module
In Stock
SKU:25734- Operating Voltage: 3-5.5V
- Supply Current: ≥ 20mA
- Optimal Sensing Distance: 3mm
- Working voltage of 5V, the output of the black line low, white line of high output
- Uses Infrared Light to Detect Anti-Interference Ability
- Sensors to adopt TCRT5000 High Sensitivity, Stable Performance
- Exquisite workmanship, with the indicator
- Has a fixed bolt hole for easy installation
Infrared Obstacle Avoidance Sensor Module
In Stock
SKU:41096- Detection distance: 2-40cm
- IO Interface: 4-wire interfaces (- / + / S / EN)
- Output signal: TTL level
- Adjustment: adjust multi-turn resistance
- Effective angle: 35 °
TCRT5000 IR reflex Tracking Sensor Module
In Stock
SKU:68250- The working voltage: 5V
- A fixed bolt hole for easy installation
- Build-in Tcrt5000 Sensor NSOR
- Applicable to a variety of platforms including Arduino / AVR / ARM /PIC
TCRT5000L 5 Channel Tracking Sensor Module
In Stock
SKU:79426- High-Quality Tracker Sensor
- The module is a convenient carrier for eight IR emitter and receiver pairs evenly paced.
- Distance between each IR Sensor: 15mm
- Uses 5 sensors for best resolution
- Great useful in building fast line following and grid navigating robots
- Comes with easy to use digital outputs with a direct connection to microcontrollers
- The array has mounting holes of 3mm diameter for easy mounting
Flame Sensor Module
In Stock
SKU:31548- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!


TechnoSam – Wired for Innovation. Built for Reliability.
At TechnoSam, we specialize in providing high-quality electronics modules, development boards, and IoT components for makers, developers, educators, and enterprises. Whether you’re building a prototype or scaling to production, our curated inventory and expert support help you bring your ideas to life — reliably and affordably.
Need Help?
(+91) 7030 10 3620
Monday – Friday: 10:00 AM – 05:00 PM
Saturady: 10:00 AM – 02:00 PM















