- New Launch Offer! Mini 35% Off On Products....
- Free shipping on orders above ₹ 1,000/-
:
:
:
0
0 items
₹0.00
No products in the cart.
TCRT5000L 5 Channel Tracking Sensor Module
In Stock
SKU:79426- High-Quality Tracker Sensor
- The module is a convenient carrier for eight IR emitter and receiver pairs evenly paced.
- Distance between each IR Sensor: 15mm
- Uses 5 sensors for best resolution
- Great useful in building fast line following and grid navigating robots
- Comes with easy to use digital outputs with a direct connection to microcontrollers
- The array has mounting holes of 3mm diameter for easy mounting
Flame Sensor Module
In Stock
SKU:31548- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
TTP223 Touch Key Module
In Stock
SKU:76942- Input Voltage : 2 Volt – 5.5 Volts DC
- The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V
- Sensitivity can adjust by the capacitance(0~50pF)
- Stable touching detection of the human body for replacing traditional direct switch key
- Provides direct mode toggle mode by pad option(TOG pin)
- After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled
- Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched
PIR Motion Detector Sensor Module HC SR501 Blue
In Stock
SKU:10385- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
- Jumper for trigger.
Capacitive Soil Moisture Sensor V.2.0
In Stock
SKU:28473- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Dimensions mm(LxWxH): 98 x 23 x 4.
- Supports 3-Pin Gravity Sensor interface
- Analog output.
- Weight (gm): 15.
Soil Moisture Sensor Module (Red)
In Stock
SKU:59621- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
- Operating Voltage: 3.3V~5V
Adafruit DS3502 I2C Digital 10K Potentiometer Breakout – STEMMA QT/Qwiic
Out of stock
SKU:35178- The microcontroller adjusts the resistance itself
- Control Interface: I2C
- Resistance Value: 0 – 10kΩ
- Number of Positions: 128
Mounting Bracket for N20 Micro Gear motors-2pcs
Out of stock
SKU:58234MB102 Breadboard Power Supply Module 3.3V/5V
In Stock
SKU:63897- Breadboard power supply module, compatible with 5V, 3.3V.
- Apply to MB102 breadboard
- Input voltage: 6.5-12 V (DC) or USB power supply
- Output voltage: 3.3V/5V can switch over
- Maximum output current: <700 ma
- Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V
- On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
Node MCU ESP8266 Serial Port Baseboard Expansion
In Stock
SKU:48169- The perfect solution for breaking out the pins from Lua V3 Nodemcu.
- Lead-out all the IO ports of the ESP-12E development board
- Lead out the pins of 5V and 3.3V power supply
- Convenient to connect with peripheral modules
- Onboard 5V / 1A DC-DC step-down converter circuit
- Onboard power indicator
- With DC power jack 6-24V.
LED Traffic Lights Signal Module Digital Signal Output Traffic Light Module for Project
In Stock
SKU:36481- Number of lights: 3
- Light color: red, yellow and green
- Active level: high level
- Operating voltage: 5V / 3.3V
- Operating current: When you use 5V high level output, the red light 13mA, yellow light 13mA, green light 25mA.
Water Level Depth Detection Sensor Module
In Stock
SKU:14682- Operating voltage: DC3-5V
- Operating current: less than 20mA
- Sensor Type: Analog
- Detection Area: 40mmx16mm
- Operating temperature: 10℃-30℃
- Humidity: 10% -90% non-condensing
Vibration Sensor Module SW 420
In Stock
SKU:82716- Using SW 420 normally closed type vibration sensor
- Comparator output, clean signal, good waveform, strong driving ability, >15mA
- Operating voltage 3.3V ~ 5V
- Output format: digital switching output (0 and 1)
- Using a wide voltage LM393 comparator
- With bolt holes for easy installation
Normally open vibration sensor module
Out of stock
SKU:63489- he working voltage of 3.3V-5V.
- Using the company’s high-sensitivity vibration switch, the default with SW-18015P vibration sensor.
- The comparator output, the signal clean, good waveform, driving ability, more than 15mA
- With a fixed bolt hole, easy to install.
- The use of wide voltage LM393 comparator.
LM35D Analog Temperature Sensor Module
In Stock
SKU:92765- Based on the semiconductor LM35 temperature sensor
- Can be used to detect ambient air temperature
- Calibrated directly in °Celsius (Centigrade)
- Linear + 10 mV/°C Scale Factor
- 0.5°C Ensure accuracy (at +25°C)
- Low power consumption, less than 60uA
- Low output impedance, 1mA current through only 0.1Ω
- With screw holes for easy installation and fixed. Aperture 2.6mm
IR Flame Sensor Infrared Receiver
In Stock
SKU:49836- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
- Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
- Detection angle about 60 degrees, the flame spectrum especially sensitive.
- The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!


TechnoSam – Wired for Innovation. Built for Reliability.
At TechnoSam, we specialize in providing high-quality electronics modules, development boards, and IoT components for makers, developers, educators, and enterprises. Whether you’re building a prototype or scaling to production, our curated inventory and expert support help you bring your ideas to life — reliably and affordably.
Need Help?
(+91) 7030 10 3620
Monday – Friday: 10:00 AM – 05:00 PM
Saturady: 10:00 AM – 02:00 PM















