Filter
Sort:
Show:
64%
100 RPM BO Motor L Shape
Add to wishlist

100 RPM BO Motor L Shape

Original price was: ₹150.00.Current price is: ₹55.00.
In Stock
SKU:73851
  1. Low density: lightweight, low inertia.
  2. Capability to absorb shock and vibration as a result of elastic compliance.
  3. Ability to operate with minimum or no lubrication due to inherent lubricity.
  4. The relatively low coefficient of friction.
  5. Operating Voltage(VDC): 3~12
  6. Shaft Length (mm): 8.5
  7. Shaft Diameter (mm): 5.5 (Double D-type)
  8. No Load Current: 40-180mA.
  9. Rated Speed(After Reduction): 100 RPM
  10. Rated Torque: 0.35 Kgcm
Add to cart
64%
200 RPM L Shape BO Motor
Add to wishlist

200 RPM L Shape BO Motor

Original price was: ₹150.00.Current price is: ₹55.00.
In Stock
SKU:45912
  1. Low density: lightweight, low inertia.
  2. Capability to absorb shock and vibration as a result of elastic compliance.
  3. Ability to operate with minimum or no lubrication due to inherent lubricity.
  4. The relatively low coefficient of friction.
  5. Operating Voltage(VDC): 3~12
  6. Shaft Length (mm): 8.5
  7. Shaft Diameter (mm): 5.5 (Double D-type)
  8. No Load Current: 40-180mA.
  9. Rated Speed(After Reduction): 100 RPM
  10. Rated Torque: 0.35 Kgcm
Add to cart
64%
100 RPM BO Motor Straight Plastic Gear Motor
Add to wishlist

100 RPM BO Motor Straight Plastic Gear Motor

Original price was: ₹150.00.Current price is: ₹55.00.
In Stock
SKU:67582
  1. Low density: lightweight, low inertia.
  2. Capability to absorb shock and vibration as a result of elastic compliance.
  3. Ability to operate with minimum or no lubrication due to inherent lubricity.
  4. The relatively low coefficient of friction.
  5. Operating Voltage(VDC): 3~12
  6. Shaft Length (mm): 8.5
  7. Shaft Diameter (mm): 5.5 (Double D-type)
  8. No Load Current: 40-180mA.
  9. Rated Speed(After Reduction): 100 RPM
  10. Rated Torque: 0.35 Kgcm
Add to cart
54%
200 RPM Dual Shaft BO Motor Straight
Add to wishlist

200 RPM Dual Shaft BO Motor Straight

Original price was: ₹150.00.Current price is: ₹70.00.
In Stock
SKU:31209
  1. Low density: lightweight, low inertia.
  2. Capability to absorb shock and vibration as a result of elastic compliance.
  3. Ability to operate with minimum or no lubrication due to inherent lubricity.
  4. The relatively low coefficient of friction.
  5. Operating Voltage(VDC): 3~12
  6. Shaft Length (mm): 8.5
  7. Shaft Diameter (mm): 5.5 (Double D-type)
  8. No Load Current: 40-180mA.
  9. Rated Speed(After Reduction): 100 RPM
  10. Rated Torque: 0.35 Kgcm
Add to cart
64%
60 RPM Dual Shaft BO Motor Straight
Add to wishlist

60 RPM Dual Shaft BO Motor Straight

Original price was: ₹150.00.Current price is: ₹55.00.
In Stock
SKU:89416
  1. Low density: lightweight, low inertia.
  2. Capability to absorb shock and vibration as a result of elastic compliance.
  3. Ability to operate with minimum or no lubrication due to inherent lubricity.
  4. The relatively low coefficient of friction.
  5. Operating Voltage(VDC): 3~12
  6. Shaft Length (mm): 8.5
  7. Shaft Diameter (mm): 5.5 (Double D-type)
  8. No Load Current: 40-180mA.
  9. Rated Speed(After Reduction): 100 RPM
  10. Rated Torque: 0.35 Kgcm
Add to cart
47%
Submersible Mini Water Pump 3-6V DC
Add to wishlist

Submersible Mini Water Pump 3-6V DC

Original price was: ₹130.00.Current price is: ₹70.00.
Out of stock
SKU:56924
  1. Operating Voltage : 2.5 ~ 6V
  2. Operating Current : 130 ~ 220mA
  3. Flow Rate : 80 ~ 120 L/H
  4. Maximum Lift : 40 ~ 110 mm
  5. Outlet Outside Diameter: 7.5 mm
  6. Outlet Inside Diameter: 5 mm
Read more
61%
5V 1 Channel Relay Module Infrared IR Remote Switch Control
Add to wishlist

5V 1 Channel Relay Module Infrared IR Remote Switch Control

Original price was: ₹890.00.Current price is: ₹350.00.
Out of stock
SKU:56278
  1. DC 5V Home lighting system
  2. Remote control switch
  3. Smart Home / Home Automation
  4. Garage Door
  5. Remote controlled gates
  6. Security Monitoring
  7. LED lighting
  8. Fluorescent lamp
Read more
35%
16 Channel 5V Relay Module with Optocoupler
Add to wishlist

16 Channel 5V Relay Module with Optocoupler

Original price was: ₹1,000.00.Current price is: ₹650.00.
In Stock
SKU:48316
  1. 5V relay with AC contact capacity of 10A 250V and optocoupler protection.
  2. Onboard power supply module does not need an external power supply. I / O port driver is active low.
  3. The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
  4. It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
  5. The 1-16 road can be any full on/off or any road.
  6. All interfaces can be directly connected through the terminal leads, very convenient.
Add to cart
37%
8 Channel 5V Relay Module with Optocoupler
Add to wishlist

8 Channel 5V Relay Module with Optocoupler

Original price was: ₹450.00.Current price is: ₹285.00.
In Stock
SKU:10594
  1. Channel: 8 channel
  2. Relay Operating Voltage: 5V
  3. One normally closed contact and one normally open contact
  4. Triode drive, increasing relay coil
  5. High impedance controller pin
  6. Pull-down circuit for the avoidance of malfunction
  7. Power supply indicator and Control indicator lamp
  8. Power supply and relay instructions, lit, the disconnect is off;
Add to cart
20%
4 Channel 5V Relay Module with Optocoupler
Add to wishlist

4 Channel 5V Relay Module with Optocoupler

Original price was: ₹200.00.Current price is: ₹160.00.
In Stock
SKU:81573
  1. 5V 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
  2. Equipped with high-current relay, AC250V 10A; DC30V 10A.
  3. Standard interface that can be controlled directly by microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
  4. Indication LED’s for Relay output status.

 

Add to cart
57%
2 Channel 5V Relay Module with Optocoupler
Add to wishlist

2 Channel 5V Relay Module with Optocoupler

Original price was: ₹180.00.Current price is: ₹78.00.
In Stock
SKU:96417
  1. Low Level Trigger Relay Module
  2. Two separate LEDs for On/Off indication of the Relay.
  3. Triggering input voltage 3.3V – 5V
  4. Two separate LEDs for On/Off indication of the Relay
  5. Triggering input voltage 3.3V – 5V 4)
  6. Back EMF protection
  7. Back EMF protection 2 LEDs to indicate when relays are ON.
  8. Works with logic level signals from 3.3V or 5V devices
  9. Opto isolation circuitry
  10. Module with diode current protection, short response time
  11. AC Control Voltage: 250V @max.10A
  12. DC Control Voltage: 30V @max. 10A
Add to cart
47%
1 Channel 5V Relay Module with Optocoupler
Add to wishlist

1 Channel 5V Relay Module with Optocoupler

Original price was: ₹150.00.Current price is: ₹80.00.
In Stock
SKU:37258
  1. Channel: 1 channel
  2. Relay Voltage: 5V
  3. High impedance controller pin
  4. Pull-down circuit for the avoidance of malfunction
  5. One normally closed contact and one normally open contact
  6. Triode drive, increasing relay coil
Add to cart
38%
L298N Based Motor Driver Module – 2A
Add to wishlist

L298N Based Motor Driver Module – 2A

Original price was: ₹230.00.Current price is: ₹143.00.
In Stock
SKU:24980
  1. Logical voltage: 5V
  2. Drive voltage: 5V-35V
  3. Logical current: 0-36mA
  4. Drive current: 2A (max. single bridge)
  5. Max power: 25W
  6. Dimensions: 44 x 44 x 28 (LxWxH)mm
  7. Weight: 26 gm
Add to cart
44%
L293D Motor Driver Module
Add to wishlist

L293D Motor Driver Module

Original price was: ₹210.00.Current price is: ₹119.00.
In Stock
SKU:86504
  1. The driver two holes of 3 mm dia.
  2. Male burg-stick connectors for supply, ground and input connection.
  3. Screw terminal connectors for easy motor connection.
  4. High noise immunity inputs.
  5. Operating Voltage(VDC): 4.5 to 12
  6. Peak Current (A): 600 mA
  7. No. of Channels: 1
Add to cart
53%
L293D Motor Driver Servo Shield Arduino Uno R3
Add to wishlist

L293D Motor Driver Servo Shield Arduino Uno R3

Original price was: ₹340.00.Current price is: ₹160.00.
In Stock
SKU:10572
  1. 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
  2. 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
  3. Can run motors on 4.5VDC to 25VDC.
  4. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  5. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
Add to cart
63%
CNC Shield V3 – Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
Add to wishlist

CNC Shield V3 – Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board

Original price was: ₹400.00.Current price is: ₹150.00.
Out of stock
SKU:72846
  1. Latest Arduino CNC Shield Version 3.10
  2. GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
  3. Coolant enable
  4. Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
  5. Compact design.
  6. 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
  7. 2 x End stops for each axis (6 in total)
Read more

Filter Products

Categories

Filter by price

Cart