Filter
Sort:
Show:
64%
16 Channel Analog/Digital Multiplexer Module
Add to wishlist

16 Channel Analog/Digital Multiplexer Module

Original price was: ₹150.00.Current price is: ₹55.00.
In Stock
SKU:52763
  1. 2V to 6V operation
  2. “On” resistance: 70 Ohms @ 4.5V
  3. 6ns break-before-make @ 4.5V
  4. Wide operating temperature range: -55C to 125C
Add to cart
43%
Digital Ammeter Voltmeter With Shunt
Add to wishlist

Digital Ammeter Voltmeter With Shunt

Original price was: ₹1,560.00.Current price is: ₹890.00.
In Stock
SKU:74162
  1. Operating Voltage: 5V DC.
  2. Current Consumption: <60mA
  3. Testing Voltage: 0-100V
  4. Testing Current: 1-100A
  5. Easy to read even in dim light
Add to cart
45%
Dual DC 100V 100A Voltmeter Ammeter Without Shunt
Add to wishlist

Dual DC 100V 100A Voltmeter Ammeter Without Shunt

Original price was: ₹560.00.Current price is: ₹310.00.
In Stock
SKU:39856
  1. Operating Voltage: 5V DC
  2. Current Consumption: <60mA
  3. Testing Voltage: 0-100V
  4. Testing Current: 1-100A
  5. Easy to read even in dim light
Add to cart
63%
RCWL-0516 Microwave Radar Sensor
Add to wishlist

RCWL-0516 Microwave Radar Sensor

Original price was: ₹100.00.Current price is: ₹37.00.
In Stock
SKU:64729
  1. Transmission signal processing control chip RCWL-9196
  2. Wide operating voltage range 4.0V to 28.0V
  3. Penetrating detection capability, compared with the traditional infrared feeling PIR
  4. Adjustable Block time and distance
  5. Operating Current: 2.8mA (typical); 3mA (max)
  6. Detection Distance: 5-9m
  7. Transmitting Power: 20mW (typical); 30mW (max)
Add to cart
57%
SS49E Linear Hall Effect Sensor Module
Add to wishlist

SS49E Linear Hall Effect Sensor Module

Original price was: ₹102.00.Current price is: ₹44.00.
In Stock
SKU:92457
  1. Type: Magnetic Sensor Module
  2. Mainly Compatible with: Ardunio
Add to cart
60%
Linear Magnetic Hall sensor
Add to wishlist

Linear Magnetic Hall sensor

Original price was: ₹100.00.Current price is: ₹40.00.
In Stock
SKU:48637
  1. S49E hall sensor
  2. Features wide-range voltage comparator LM393
  3. Signal output indicator
  4. Analog / Digital output
Add to cart
45%
LM393 Linear Hall Effect Sensor Module
Add to wishlist

LM393 Linear Hall Effect Sensor Module

Original price was: ₹100.00.Current price is: ₹55.00.
In Stock
SKU:61284
  1. S49E hall sensor
  2. Features wide-range voltage comparator LM393
  3. Signal output indicator
  4. Analog / Digital output
Add to cart
38%
L298N Based Motor Driver Module – 2A
Add to wishlist

L298N Based Motor Driver Module – 2A

Original price was: ₹230.00.Current price is: ₹143.00.
In Stock
SKU:24980
  1. Logical voltage: 5V
  2. Drive voltage: 5V-35V
  3. Logical current: 0-36mA
  4. Drive current: 2A (max. single bridge)
  5. Max power: 25W
  6. Dimensions: 44 x 44 x 28 (LxWxH)mm
  7. Weight: 26 gm
Add to cart
44%
L293D Motor Driver Module
Add to wishlist

L293D Motor Driver Module

Original price was: ₹210.00.Current price is: ₹119.00.
In Stock
SKU:86504
  1. The driver two holes of 3 mm dia.
  2. Male burg-stick connectors for supply, ground and input connection.
  3. Screw terminal connectors for easy motor connection.
  4. High noise immunity inputs.
  5. Operating Voltage(VDC): 4.5 to 12
  6. Peak Current (A): 600 mA
  7. No. of Channels: 1
Add to cart
53%
L293D Motor Driver Servo Shield Arduino Uno R3
Add to wishlist

L293D Motor Driver Servo Shield Arduino Uno R3

Original price was: ₹340.00.Current price is: ₹160.00.
In Stock
SKU:10572
  1. 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
  2. 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
  3. Can run motors on 4.5VDC to 25VDC.
  4. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  5. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
Add to cart
63%
CNC Shield V3 – Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
Add to wishlist

CNC Shield V3 – Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board

Original price was: ₹400.00.Current price is: ₹150.00.
Out of stock
SKU:72846
  1. Latest Arduino CNC Shield Version 3.10
  2. GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
  3. Coolant enable
  4. Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
  5. Compact design.
  6. 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
  7. 2 x End stops for each axis (6 in total)
Read more
63%
USB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
Add to wishlist

USB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino

Original price was: ₹340.00.Current price is: ₹128.00.
In Stock
SKU:45918
  1. Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini
  2. Original FTDI FT232 chip, stable performance
  3. USB power has current protection, using 500MA self-restore fuse
  4. RXD/TXD transceiver communication indicator
  5. With power, sending, receiving indicator, working status LED indicators
  6. Mini USB Port Connection
  7. Support 3.3V, 5V
Add to cart
40%
TTP229 16-Way Capacitive Touch Switch Digital keypad Module
Add to wishlist

TTP229 16-Way Capacitive Touch Switch Digital keypad Module

Original price was: ₹230.00.Current price is: ₹140.00.
In Stock
SKU:69327
  1. Working voltage: 2.4V to 5.5V
  2. Built-in regulator
  3. Two modes
    1. Simple 8 key mode with independent 8 Channel parallel output.
    2. Advanced 16 Key modes with I2C interface output.
  4. Modes can be selected and configured by the user.
  5. Adjustable sensitivity
Add to cart
45%
TTP226 8way Capacitive Touch Switch Module
Add to wishlist

TTP226 8way Capacitive Touch Switch Module

Original price was: ₹240.00.Current price is: ₹132.00.
In Stock
SKU:81436
  1. Onboard 8 key TTP226 capacitive touch induction IC.
  2. Onboard 8-way level indicator.
  3. Working voltage: 2.4 to 5.5 V.
  4. Modules, you can set the output mode, key output mode, the longest time and fast/low power output
Add to cart
40%
TTP224 4way Capacitive Touch Switch Module
Add to wishlist

TTP224 4way Capacitive Touch Switch Module

Original price was: ₹130.00.Current price is: ₹79.00.
In Stock
SKU:32795
  1. Onboard TTP224 capacitive touch sensor IC 4 keys
  2. 4 board-level status indicator
  3. Working voltage: 2.4V-5.5V
  4. Advanced Pins breakout, so that the output mode and working mode are selectable.
  5. Low power selection
Add to cart
76%
Digital Sensor TTP223B Module Capacitive Touch Sensor
Add to wishlist

Digital Sensor TTP223B Module Capacitive Touch Sensor

Original price was: ₹100.00.Current price is: ₹24.00.
In Stock
SKU:16408
  1. Power supply voltage(VCC): 2.0, 3, 5.5 V.
  2. Output high VOH: 0.8VCC V
  3. Output low VOL: 0.3VCC V
  4. Response time (touch mode) : 60 mS
  5. Response time (low power mode) : 220 mS
  6. Can replace the traditional touch of a button
  7. Four M2 screws positioning holes for easy installation
Add to cart

Filter Products

Categories

Filter by price

Cart