- New Launch Offer! Mini 35% Off On Products....
- Free shipping on orders above ₹ 1,000/-
:
:
:
0
0 items
₹0.00
No products in the cart.
Pro Mini ATMEGA328P 5V/16M Blue
Out of stock
SKU:58392- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- A pair of TTL level serial port transceiver : RX / TX.
Arduino Pro Micro 5V 16M Leonardo
In Stock
SKU:26784- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
Arduino Pro Mini ATMEGA328P 5V/16M
In Stock
SKU:91537- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7
- A pair of TTL level serial port transceiver : RX / TX
- 6 PWM port: D3, D5, D6, D9, D10, D11
- Support serial download
Arduino Mega 2560 Board with USB Cable
Out of stock
SKU:64851- 54 Digital I/O terminals (14 of which have programmable PWM outputs)
- 16 Analog Inputs
- 4 UARTs (hardware serial ports)
- 16 MHz crystal clock
- Operating voltage: 6 ~ 12v
Arduino Nano R3 With USB Cable Soldered
In Stock
SKU:73406Main Features
- Operating Voltage (logic level): 5V
- With USB cable and Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Arduino Nano R3 CH340 Soldered without Cable
In Stock
SKU:50219- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
Arduino Uno R3 CH340 SMD Best Quality
In Stock
SKU:81657- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Arduino Uno R3 with Cable Best Quality
In Stock
SKU:73948- Micro-controller : ATmega328
- Operating Voltage : 5V
- Input Voltage (recommended) : 7-12V
- Digital I/O Pins : 14 (of which 6 provide PWM output)
- Analog Input Pins : 6
Raspberry Pi 5 Model 8GB
Out of stock
SKU:64793- Model: Raspberry Pi 5 Model 8GB
- Ram: LPDDR4X-4267 8GB SDRAM
- PCIe 2.0 x1 interface for fast peripherals
- 5V/5A DC power (PD enabled)
- Real-Time Clock (RTC), powered by an external battery
- On-board power button!!
Digital Multimeter Small Yellow Color LCD AC DC Measuring Voltage Current
In Stock
SKU:43812- Dimensions: 12.5 x 7 x 2 CM (LxWxH)
- Probe Length: 60 CM (2 feet approx.)
- Weight: 160 gm
- Color: Yellow
- 15 millimeter high LCD.
L293D Motor Driver Servo Shield for Arduino (Green Connector)
In Stock
SKU:71485- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
1602 (16×2) LCD Display with I2C/IIC interface – Blue Backlight
In Stock
SKU:43897- I2C interface for simplified connectivity
- Yellow backlight for enhanced visibility
- Compact 16×02 character display
- Suitable for diverse electronic applications
1602 (16×2) LCD Display with I2C/IIC interface – Green Backlight
In Stock
SKU:81072- I2C interface for simplified connectivity
- Yellow backlight for enhanced visibility
- Compact 16×02 character display
- Suitable for diverse electronic applications
1 Channel 5V Relay Module Black
In Stock
SKU:27589- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
LM35D Analog Temperature Sensor Module + Cable
In Stock
SKU:64930- Based on the semiconductor LM35 temperature sensor
- Can be used to detect ambient air temperature
- Calibrated directly in °Celsius (Centigrade)
- Linear + 10 mV/°C Scale Factor
- 0.5°C Ensure accuracy (at +25°C)
- Low power consumption, less than 60uA
- Low output impedance, 1mA current through only 0.1Ω
- With screw holes for easy installation and fixed. Aperture 2.6mm
DHT11 Temperature and Humidity Sensor Module High Quality
In Stock
SKU:51374- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
- Temperature measuring range: 0~+50degree.
- Humidity measurement accuracy: ±5.0%RH.
- Temperature measurement accuracy: ±2.0degree.
Recently Viewed Products
PLA Pro 3D Printer Filament (Virtual) – Grey
In Stock
SKU:PLAPRO-B7335-1-1-1- Virtual Filament (Only for 3D Printer Subscription)
- Consistently High Quality and durable prints
- 10 times stronger than regular PLA on the market
- Deliver exceptional performance and printing smoothness
- Made from great, high-performance materials for professional prints
- Ready to print with any 3D Printer Subscription plan you take
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!


TechnoSam – Wired for Innovation. Built for Reliability.
At TechnoSam, we specialize in providing high-quality electronics modules, development boards, and IoT components for makers, developers, educators, and enterprises. Whether you’re building a prototype or scaling to production, our curated inventory and expert support help you bring your ideas to life — reliably and affordably.
Need Help?
(+91) 7030 10 3620
Monday – Friday: 10:00 AM – 05:00 PM
Saturady: 10:00 AM – 02:00 PM
















