- New Launch Offer! Mini 35% Off On Products....
- Free shipping on orders above ₹ 1,000/-
:
:
:
0
0 items
₹0.00
No products in the cart.
DHT11 Temperature and Humidity Sensor With Wire
In Stock
SKU:80746- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
- Temperature measuring range: 0~+50degree.
- Humidity measurement accuracy: ±5.0%RH.
- Temperature measurement accuracy: ±2.0degree.
4 x 1.5V AA Battery Holder Without Cover
In Stock
SKU:36521- Cell Quantity: 4.
- Battery type: AA.
- Storage temperature: 25ºC.
- Max Operate temperature: 80ºC.
- Wire Length: 120 mm.
- Mounting holes diameter: 3 mm.
- Color: Black.
Digital Multi Servo Tester ESC Speed Control
In Stock
SKU:92038- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
SafeConnect FLAT 45CM 22AWG Servo Lead Extension (JR) Cable
In Stock
SKU:72635SafeConnect Twisted 15CM 22AWG Servo Lead Extension (JR) Cable w ith Self Locking Hook
In Stock
SKU:35971SafeConnect Twisted 15CM 22AWG Servo Lead Extension (JR) Cable
In Stock
SKU:18432SafeConnect Flat 15CM 26AWG Servo Lead Extension (JR) Cable
In Stock
SKU:57082SafeConnect Flat 30CM 22AWG Servo Lead Extension (JR) Cable
In Stock
SKU:94271- High-Quality cable
- One male and one female connector.
- Flat 30 cm Servo Lead Extention (JR)
- Quality wire and connectors used.
- Great for larger planes with servos that experience high loads.
10CM Male to Male Servo Lead (JR) 26AWG
In Stock
SKU:59813Flow Sensor
Out of stock
SKU:26534- Good Quality Water Flow Sensor
- Operating Voltage: 3.5-24VDC
- Flow Range: 1-60L/Min
- Suitable for Water Pressure Below 1.75MPa
Arduino Uno R3 WiFi AtMega328p
Out of stock
SKU:70381- USB-TTL converter.
- Logic Level: 5V.
- Operating Supply Voltage: 5V.
- Digital I/O Pins: 14.
- Analog I/O Pins: 6.
Prototype Shield V3.0 for Arduino Mega with mini Breadboard
In Stock
SKU:48165- The shield can support being fully assembled with Arduino MEGA
- Support soldering components directly on this shield
- Support sticking the mini breadboards on this shield
- Reset button up top
- Mainboard aureate quadrate
- With SOP28 SMT components encapsulation
Arduino Mega 2560 R3 Sensor Shield V2.0 Best Quality
In Stock
SKU:62947- PCB finest Immersion Gold processing
- Plug it easier to set up a variety of commonly used module interface
Original JHD 16×2 Character LCD Display With Blue Backlight
In Stock
SKU:35782- Model: JHD659 Y/YG
- Display: 16×2 character
- Outline: 80.0×36.0x14.5
- VA: 64.5×14.5
- Controller: SPLC780D
- Character: 2.95×4.35
- Driver: 1/16
Original JHD 16×2 Character LCD Display With Yellow Backlight
In Stock
SKU:81426- Model: JHD659 Y/YG
- Display: 16×2 character
- Outline: 80.0×36.0x14.5
- VA: 64.5×14.5
- Controller: SPLC780D
- Character: 2.95×4.35
- Driver: 1/16
2WD Mini Round Double Deck Smart Robot Car Chassis DIY Kit
In Stock
SKU:50467- Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.
- This car is the tachometer encoder.
- With a 4 AA battery box (batteries not included).
- It can be used for distance measurement, velocity.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
- Wireless remote control.
- Size: 21 x 15 cm (L x W).
- Wheel size: 6.5 x 2.7cm (Dia. x H).
Recently Viewed Products
MQ 4 High Sensitivity Gas Methane Detector Sensor Module
In Stock
SKU:28406- Detecting range: 300~10000ppm
- Signal output indicator.
- Dual Signal output (analog output and TTL output).
- The TTL output signal is low level, allows us to connect with SCM directly.
- Analog output 0~5V voltage.
- Quick response and recovery.
PLA Pro 3D Printer Filament (Virtual) – Grey
In Stock
SKU:PLAPRO-B7335-1-1-1- Virtual Filament (Only for 3D Printer Subscription)
- Consistently High Quality and durable prints
- 10 times stronger than regular PLA on the market
- Deliver exceptional performance and printing smoothness
- Made from great, high-performance materials for professional prints
- Ready to print with any 3D Printer Subscription plan you take
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!


TechnoSam – Wired for Innovation. Built for Reliability.
At TechnoSam, we specialize in providing high-quality electronics modules, development boards, and IoT components for makers, developers, educators, and enterprises. Whether you’re building a prototype or scaling to production, our curated inventory and expert support help you bring your ideas to life — reliably and affordably.
Need Help?
(+91) 7030 10 3620
Monday – Friday: 10:00 AM – 05:00 PM
Saturady: 10:00 AM – 02:00 PM

















